Sconcon
Servo Controller

Scon SB022S USB Servo Controller
  • SconScript V2.5 Firmware
  • 512 KB Off-Processor memory
  • Eight Buffered servo outputs
  • 3 Buffered digital inputs
  • 2 Open collector outputs
  • 1 Flexable I/O
  • 5.5 - 12 Volt operation
  • 10 Mips processor
  • Small 2.2 X 1.8 inch size
  • USB Interface
  • Seperate servo power
  • Screw Terminals for Power
  • Supplied with PScon
  • Schematic diagram included
  • Quality components
  • Assembled and tested
  • Power source not included
 Servo Controller
In addition to the 8 standard servo outputs, the SB022S has 2 Open collector transistor outputs, 3 buffred inputs and a direct processor connection, these 6 non-servo digital inputs and outputs can be used in the scripted program control of your robotic device. Pogramming and setup is acomplished using a PC with a USB port. The SB022S cable end must be a mini USB B connector.
Order one now $39.95

US Shipping $6.95 - Outside US $12.95